BetaFPV Air Brushless Flight Controller G4 4-in-1 AIO 400mw VTX

SKU: L2-14378

Small Parcel

15-30 Days

Free

Special Line

Our courier will deliver to the specified address

7-15 Days

From $20

Courier delivery

courier will deliver to the specified address

3-5 Days

From $40

$58.99

Out of stock

Out of stock

Don't Miss Top Accessories

Description

Air Brushless Flight Controller, the first 1S FC that utilizes the STM32G473CEU6, experienced a remarkable 55% increase in computing speed and lightning-fast response times, surpassing the F411. Equipped with the industry-leading ICM42688P gyro and onboard 5.8G 25mw~400mw VTX, it offers both 4IN1 with 2.9g and 5IN1 with 3.6g Versions, which takes your drone’s posture and movement accurately to the next level. Immerse yourself effortlessly in the drone world of Finger-Tip control. Unmatched value and undeniable superiority with it, leave most of the competition in the dust. It will be the advanced choice for future ultralight 1S whoop drones!
Check out all our Whoop Style AIO Flight Controllers and the rest of our BetaFPV Products! 

ef38d597f6a67be358f0a930347b18d1 1024x1024 22172532 bec1 4c01 83b2 16f9d873df5a
  • Crafted for advanced pilots, the ultra-thin (0.8mm) and lightweight Air FC is engineered for maximum agility and race-winning performance. It is the definitive choice for pushing the boundaries of FPV flight.  For newcomers to FPV or those flying for entertainment, the Matrix FC is the ideal alternative. It offers enhanced durability, requires no welding, and provides a more beginner-friendly experience.
  • VTX Power: Higher VTX power consumes more energy and generates more heat, reducing flight time. For better flight time in indoor scenarios, use 25~100mW power. 
  • The calibrated power measured after temperature stabilization (stabilization condition: more than 60 seconds after powering on the flight controller) is: when set to 25mW, the output power is between 14dBm±0.8dBm (21mW to 30mW), which meets the normal standard. The following is the 5IN1 Air FC test data with the VTX set to 25mW, the power data is tested at different times on the R1, R3, R5, and R7 frequency points.
lQDPJyEp
  • Motor Wiring: Only soldering is supported for motor wiring on the flight control. Be careful to ensure the temperature of the soldering iron is maintained below 370℃ and limit the soldering duration to 1~2 seconds.

lQDPJwgK8bAC1aPNA4TNBkCw9cIXZumvvZsG0ppekZL1AA 1600 900 480x480 f19f09d5 c872 4946 99da aefc67f3b418

 

Bullet Points

  • Air Brushless Flight Controller, the first 1S FC that utilizes the G473 processor, experienced a remarkable 55% increase in computing speed and lightning-fast response times for precise racing and complex freestyle maneuvers, surpassing the F411.
  • Higher integration yet lightweighter design, featuring a custom miniature OSD chip. Weighing only 2.9g (4IN1 Version) or 3.6g (5IN1 Version), it offers extra UART port options for effortless function expansions, adapting flawlessly to any flight scenario.
  • Default integrated onboard 25-400mW VTX. Streamlines installation saves space, reduces weight, and boosts convenience for VTX and FC adjustments. The 5IN1 Version even integrates the Serial ELRS 2.4G RX.
  • Elevate your drone’s precision with the industry-leading ICM42688P gyro, integrated accelerometer, cutting-edge sensor calibration, and filtering algorithms, and a sample rate of up to 8K, which takes the drone’s posture and movement accurate and precise drone to the next level.
  • Unlock extensive flight data recording and analysis with an impressive up to 16MB capacity black box. Maximize performance and diagnose faults effectively, leveraging the full potential of your drone.

lQDPJwgK8bAC1aPNA4TNBkCw9cIXZumvvZsG0ppekZL1AA 1600 900 480x480 25e4ddd2 c086 4313 8267 109f76a0b4cf

Specifications

FC

  • Weight: 2.9g (4IN1 Version) / 3.6g (5IN1 Version) 
  • Mounting Hole Size: 26mm x 26mm 
  • CPU*: STM32G473CEU6 (168MHz) 
  • Six-Axis: ICM42688P (SPI connection) 
  • Blackbox Memory: 16MB
  • Sensor: Voltage&Current
  • 5V BEC*: 5V 3A
  • USB Port: SH1.0 4-Pin
  • Built-in ESC with 5A continuous
  • RX: Serial ELRS 2.4G (V3.4.3) (Only 5IN1 Version)
  • 4IN1 Version: FC+ESC+OSD+VTX 
  • 5IN1 Version: FC+ESC+OSD+VTX+RX

ESC

  • Input Voltage: 1S
  • FC Firmware Version: Betaflight_4.5.0_BETAFPVG473
  • ESC Firmware: A_X_5_96KHz_V0.19.hex for BB51 Bluejay hardware
  • Signal Support: D-shot300, D-shot600

VTX

  • Output Power: 25/100/200/400/PIT
  • Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
  • Channel SEL: SmartAudio2.0
  • Modulation Type: FM 
  • Frequency Control: PLL 
  • All Harmonic: Max -50dBm 
  • Frequency Stability: ±100KHz (Typ.) 
  • Frequency Precision: ±200KHz (Typ.) 
  • Channel Carrier Error: ±1.5dB
  • Antenna Port: 50 Ω 
  • Operating Temperature: -10℃~+80℃

Diagram

Air Brushless Flight Controller (4IN1 Version):
lQDPJwgK8bAC1aPNA4TNBkCw9cIXZumvvZsG0ppekZL1AA 1600 900 480x480 230b58cf 3263 44bd ad8e ff206326aee0
a16cc7ea966dbb54e2469fa3929f68c4 480x480 7f124cb6 3a3c 4e60 8185 a50e486faea6

Comparison Between G473 and F411

Say goodbye to limitations and embrace the cutting-edge technology of the G473 flight controller for an unparalleled flight experience. Air Brushless Flight Controller features up to 168MHz superior CPU Clock Speed and 4 richer serial ports, enabling lightning-fast response times and advanced computing power, making it ideal for demanding flight, which takes your flying experience to the next level and demonstrates outstanding performance, surpassing all 1S FC options available on the market at present. 

1 600x600 34af4de9 34b1 484a 8c4c f9d9af65141c

 

Betaflight Firmware and CLI 

Betaflight official developers recommend using version 42688 of the gyroscope, and many issues with ICM42688 have been fixed in version 4.5.0. Please learn more from version 4.5.0.

Bluejay ESC Firmware

With BB51 ESC solution,  Air Brushless Flight Controller is based on A_X_5_96KHz_V0.19.hex for BB51 Bluejay hardware, it supports D-shot300, D-shot600, and even RPM filtering in Betaflight, offers 24KHz, 48KHz, and 96KHz fixed PWM frequency for options, and custom start-up melodies. 

DO NOT flash the firmware with a shorter interval, otherwise, there will be a certain chance of stalling and burning the flight controller.

1 25da6bbc 08db 453a b88a 6661e8912804

 

Connecting External RX/VTX

Please note that UART2 has connected to the VTX by default. This FC reserves 3 complete full-featured serial ports that can be used for external CRSF/SBUS receivers, GPS, HD VTX, or other serial devices. You can refer to the below pictures. 

4IN1 600x600 2fbe9cd8 d297 4060 a3ae 0c75e15fc8b7

0808203bfb0a5d81df523685f9341f1f fd6d2815 5e17 4185 ba2b 759e2cfcf2a1

Attention

  • VTX Power: Higher VTX power consumes more energy and generates more heat, reducing flight time. For better flight time in indoor scenarios, use 25~100mW power.
  • Motor Wiring: Only soldering is supported for motor wiring on the flight control. Avoid terminal plugging.
  • VTX Antenna: Connect and install the image transmission antenna before powering on the flight control. Alternatively, set transmission power to 0 to avoid burnout.

Package Includes:

  • 1 * Air Brushless Flight Controller
  • 1 * Type-C to SH1.0 Adapter 
  • 1 * SH1.0 4Pin Adapter Cable
  • 1 * 5.8g VTX Antenna
  • 1 * BT2.0 U Whoop Cable Pigtail | 40mm
  • 4 * M1.4*4 Self-tapping Screws
  • 4 * Shock Absorbing Ball

3f89305fb1dabad87b9b93324e3c25cd 480x480 8e2ca3ec 29cd 4e85 8b00 fad281c63b9d

Specification

Overview

Weight0.026 kg

Customer Reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.