GEPRC GEP-CL35 CineLog35 V2 3.5″ Drone Frame Kit

The GEP-CL35 V2 version was released after careful development by the GEPRC team.

GEP-CL35 V2 is developed and upgraded on the basis of CL35. It can be mounted with O3 VTX. The camera adopts the bottom-mounted shock absorption gimbal to solve the camera IMU’s resonance issue, and achieve a good anti-shaking effect. The main carbon plate and injection prop guards increased the 7075 aluminum column for structural strengthening.

Battery installation method using a strap with 7075 aluminum parts fixed. Power XT60E1-M plug and carbon plate are integrated and integrated for convenient application. The prop guard adds a storage card and USB port to the O3 Air Unit for easy data reading.

GEPRC strives for the ultimate flight experience!

Check out all our Cinewhoop Frames and the rest of our GepRC Products!

Specification:

• Motor to Motor: 142mm
• Top Plate: 2mm
• Bottom Plate: 1.5mm
• Arm Plate: 3.5mm
• FC Mounting Hole: 25.5mm x 25.5mm
• VTX Mouning Hole : 20mm x 20mm/25mm x 25mm
• Motor Mounting Hole: 12mm x 12mm
• Camera Installation Space: 20mm
• Propeller Guard Internal Diameter: 95mm
• Suitable Propeller Size: 3.5 inch propeller
• Weight: 133.7g

Features:

• Prop guard for O3 Air Unit adds storage card and USB port for easy data reading.
• Innovative camera shock-absorbing structure to fix the issue of lens IMU resonance and achieve the optimal anti-shake effect.
• Battery installation method using a strap with 7075 aluminum parts fixed, solid and stable.
• Power cable using XT60E1-M plug and carbon plate integrated design, user-friendly.
• Injection molding prop guard is tough and impact-resistant, and the connection between the frame and the carbon plate is strengthened with aluminum columns.

Package Includes:

• Carbon Plate
• 1 X Main carbon plate 3.0mm
• 1 X Top Plate 2.0mm
• 1 X Bottom plate 1.5mm
• Screw Kits
• 2 X Battery strap fixed aluminum parts
• 2 X 7075 mesh aluminum column M2*11.5*4
• 4 X 7075 mesh aluminum column M2*25*3.3
• 4 X Custom half crescent head screws M3*15
• 6 X Cup head screw M2*18
• 2 X Round head screws M2*16
• 4 X Round head screws with pad M2*4
• 4 X Round head screws M2*5.5
• 30 X Round head screws M2*7
• 14 X Round head screws M2*12
• 16 X Round head screws M2*8
• 6 X Round head screws M1.6*8
• 4 X Round head screws M2*6
• 6 X Round head screws M2.5*6
• 1 X Chamfered Hexagon Socket Screws M5x28
• 4 X Press Rivet Nuts M3
• 4 X self-tightening nuts M2
• 18 X Iron nuts M2
• 1 X Flange Nut M5
• 12 X Press Rivet Nut_Brass Color M2*1.9-OD4.9
• 3D Printed Parts
• 1 X Camera mount 2 holes
• 1 X Camera mount 4 holes
• 1 X Receiver mount
• 1 X T-shaped antenna mount
• 1 X VTX antenna mount
• 1 X Capacitor mount
• 1 X Power plug printed parts
• 1 X GP Camera base mount
• Injection Molded Parts
• 1 X Injection molded prop guard
• 4 X Vibration dampening rubber for FC M2*6
• 6 X Camera vibration dampening rubber
• 4 X Camera gimbal shock absorbing rubber ring M3*10.5*10.25
• Other Accessories
• 1 X Power XT60E1-M plug with cable
• 4 X Motor hub M7*15mm
• 3 X 5.8G VTX extension cable 80mm
• 7 X Heatshrink tube
• 1 X Naked GP Camera base mount( 1 X base mount, 2 X round head M2*12, 2 X
• press rivet nut M2)
• 4 X BEC pads
• 2 X Battery non-slip pads for Cinelog 35 v2
• 2 X Receiver Antenna Stick 100mm
• 1 X Battery strap M20*250
• 1 X Battery strap M20*220
• 1 X L-shaped screwdriver 1.5MM