Happymodel CrazyG473 V1.0 5-IN-1 AIO flight controller built-in 2.4G UART ELRS and OPENVTX

SKU: U3-14317

Small Parcel

15-30 Days

Free

Special Line

Our courier will deliver to the specified address

7-15 Days

From $20

Courier delivery

courier will deliver to the specified address

3-5 Days

From $40

$83.99

Out of stock

Out of stock

Don't Miss Top Accessories

Description

Tips: The Onboard VTX can only work when the battery is plugged. And on Disarm the VTX enters a Low Power mode. So when the vtx is at a very low power when the drone is not armed, you can change the power level value.

This the first AIO 5-IN-1 flight controller based on G473 MCU platform from Happymodel, Built-in UART ExpressLRS receiver and OpenVTXbetter for 65mm 1s Micro FPV whoops.

Check out all our Flight Controllers and the rest of our HappyModel Products!

a b1f7b837 cb72 4c97 8b8d b4c9c47f93db

b 328115a4 1c3a 4593 8ac6 34e08bfde7f0

Specifications:

FC

  • MCU: STM32G473CEU6
  • Gyro: ICM42688P
  • Blackbox memory: 16MB
  • Sensor: Voltage & Current
  • BEC: 5V, Max. 2A
  • UART: UART 1, UART 2, UART 3 (For RX), UART 4(For VTX)
  • BetaFlight OSD: AT7456E
  • ESC: 5A continuous
  • RX: Serial ELRS 2.4GHz
  • RX antenna: Enameled copper wire 31mm length
  • Receiver firmware target: HappyModel EP1/EP2 2.4GHz RX
  • OPENVTX: 5.8GHz 48 channels, Max. 400mW
  • FC firmware target: CRAZYBEEG473
  • USB port: SH1.0-4Pin
  • Battery connector: A30
  • Mounting hole size: 5mm x 25.5mm
  • Weight: 83g without pigtail and vtx antenna

ESC

  • Power input: 1S Only
  • Current: 5A continuous, 6A peak
  • ESC firmware: V0.21.hex Bluejay
  • Firmware target: A_X_5_96KHz
  • Digital signal protocol: DShot300, DShot600

VTX

  • OPENVTX Firmware
  • Support firmware upgrade by openvtx configurator
  • Output power: PIT/10/25/100/400
  • Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
  • Channel SEL: SmartAudio2.1
  • Modulation type: FM
  • Operating temperature: -10℃~+80℃
  • Antenna port: IPEX1/U.FL

Noted: Visit https://app.betaflight.com and click “select your device” then choose can’t find my USB device, then connect comport and betaflight configurator.

Due to firmware target is not available in current betaflight official ,you can download hex file from the belowing link:

Firmware download CRAZYG473 4.6.0 betaflight firmware

Default factory dump file Dump file for CRAZYG473 Betaflight4.6.0

Package Includes:

  • 1 x Happymodel CrazyG473 V1.0 5-IN-1 AIO flight controller

Specification

Overview

Weight0.015 kg

Customer Reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.