Happymodel X14 ELRS 5-IN-1 AIO flight controller built-in 2.4G UART ELRS V3.0 and OPENVTX

SKU: R2-14316

Small Parcel

15-30 Days

Free

Special Line

Our courier will deliver to the specified address

7-15 Days

From $20

Courier delivery

courier will deliver to the specified address

3-5 Days

From $40

$83.99

Out of stock

Out of stock

Don't Miss Top Accessories

Description

X14 ELRS flight controller is the updated version for X12ELRS PRO, this flight controller is based on STM32G473 MCU, provide more UARTs, built-in 12A 4-IN-1 ESC and Serial ELRS receiver, also comes with OPENVTX max power up to 400mw. It’s a good option for 75mm/85mm 2S whoops building.

Check out all our Flight Controllers and the rest of our HappyModel Products!

A 3d41add4 31b0 4395 b7ba dbec85ee7153

B e3346946 35d1 4f10 95f1 2b83b012ca48

C ea4cfba5 e2de 4819 934c bbcedc26f0a9

D 48c93989 d33f 464c b43c 1849f32253b2

Specifications:

FC

  • MCU: STM32G473CEU6
  • Gyro: ICM42688P
  • Blackbox memory: 16MB
  • Sensor: Voltage & Current
  • BEC: 5V, Max. 2A
  • UART: UART 1, UART 2, UART 3 (For RX), UART 4(For VTX)
  • BetaFlight OSD: AT7456ELAH
  • Camera plug: 0.8mm 3pin
  • ESC: 12A continuous
  • OPENVTX: 5.8GHz 48 channels, Max. 400mW
  • FC firmware target: CRAZYBEEG473
  • USB port: SH1.0-4Pin
  • Battery connector: XT30 or A30
  • Mounting hole size: 5mm x 25.5mm
  • Weight: 83g without power pigtail and VTX antenna

ESC

  • Power input: 1-2S Lipo input
  • Current: 12A continuous, 15A peak
  • ESC firmware: V0.19 48KHz Bluejay
  • Firmware target: Z_H_30_48KHz
  • Digital signal protocol: DShot300, DShot600

VTX

  • OPENVTX Firmware
  • Support firmware upgrade by openvtx configurator
  • Output power: PIT/10/25/100/400
  • Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
  • Channel SEL: SmartAudio2.1
  • Modulation type: FM
  • Operating temperature: -10℃~+80℃
  • Antenna port: IPEX1/U.FL

RECEIVER

  • Serial ExpressLRS 2.4GHz
  • Antenna: Enameled copper wire 31mm length
  • Firmware target: HappyModel EP1/EP2 2.4GHz RX
  • Telemetry output Power: <12dBm
  • Compatible with ExpressLRS V3.x.x TX Module
  • ExpressLRS firmware version 3.0.1
  • Support flash firmware by WIFI
  • Bind method is the same like all ExpressLRS 2.4GHz receivers

 

Noted: Visit https://app.betaflight.com and click “select your device” then choose can’t find my USB device, then connect comport and betaflight configurator to do configuration setting.

Default dump file for Mobula8 with X14 ELRS AIO flight controller :

Dump file for Mobula8 UART ELRS V2.0

Package Includes:

  • 1 x Happymodel X14 ELRS 5-IN-1 AIO flight controller

Specification

Overview

Weight0.019 kg

Customer Reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.