Ready-to-Fly Drones · Shop by specification
Find the right ready-to-fly drones faster.
Choose the aircraft type and package format that matches how quickly you want to get flying.
15-30 Days
Free
Our courier will deliver to the specified address
7-15 Days
From $20
courier will deliver to the specified address
3-5 Days
From $40
$22.99
Out of stock
Out of stock
MicoAir MT-06 6m Range Finder Sensor, Tiny size, for indoor and outdoor use, powerful range, works in sunlight. Supports multiple protocols, excellent choice for Ardupilot/PX4
Check out all our FC Accessories and the rest of our MicoAir Products!

Step 1:
Configure the MT-06 output protocol as “mav_apm” , by using MicoAssitant.
(Default settings, feel free to skip)
Step 2:
Connect the MT-06 module to the serial port of the flight controller, such as Telem2 on pixhawk.
Step 3:
Configure these parameters in the Mission Planner
SERIALn_BAUD 115
SERIALn_OPTIONS 1024 (don’t forward)
SERIALn_PROTOCOL 1
RNGFND1_TYPE 10
n depends on which serial port the MTF-01 connected, for example, n=2 when it connect to Telem2.
Step 4:
After that, we need to reboot the flight controller or just refresh the parameters in Mission Planner.
And then these parameters need to be configured.
RNGFND1_MAX_CM 600
RNGFND1_MIN_CM 2
RNGFND1_ORIENT 25
When you complete the above steps, you should be able to observe the range sensor data on the Mission Planner’s “Status” page. The “rangefinder1” should have some value.
MAV_1_CONFIG TELEMn
(n depends on which serial port you connect to)
Reboot the flight controller
MAV_1_MODE Normal
SER_TELn_BAUD 115200 8N1
EKF2_RNG_AID Range aid enable
EKF2_HGT_MODE Range sensor
MAV_1_CONFIG TELEMn
(n depends on which serial port you connect to)
Reboot the flight controller
MAV_1_MODE Normal
SER_TELn_BAUD 115200 8N1
EKF2_RNG_CTRL Enabled
EKF2_HGT_REF Range sensor
| Weight | 0.011 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
No account yet?
Create an AccountWXBMW replacement path
Reference item · currently unavailable
MicoAir MT-06 6m Range Finder Sensor remains available as a specification reference. No one-click substitute is verified yet; use the selection, Build and inquiry routes below.
No verified one-click substitute yet. WXBMW will not present an unrelated component as a direct replacement.
Check voltage, dimensions, mounting, protocol, connectors and operating limits. A similar name or size does not prove drop-in compatibility.
Use this listing as a reference inside a system plan; every linked Build still requires component-by-component verification.
Send the reference model and your Build requirements for an available or OEM option review.
Request a WXBMW replacement match
Reviews
There are no reviews yet.