DarwinFPV Cement Stack F722 Flight Controller MPU6000 3-8S 100A 32bit ESC – 30x30mm

Darwin FPV “cement” ultra-durable waterproof stack is the top stack launched by the Darwin team for professional pilots. It completely solves the industry problem of poor reliability of fpv drones, allowing you to fly in any environment and greatly improving the fun of flying. Satisfy your various creative inspirations!
We have introduced many novel features on this stack, such as canceling all the easy-to-loose direct socket interfaces, canceling the traditional heat dissipation shell with low thermal conductivity, adding waterproof and impact-resistant treatment with glue filling, and adopting the ultra-high current MOS bus technology has added more than 10 core hardware protections, such as soft start protection circuit, anti-reverse connection, anti-short circuit and anti-overcurrent circuit, to ensure stability and reliability in extreme environments. And keep the product size and weight almost the same as ordinary stack, without affecting your installation compatibility and flying feel.

Check out all our 30x30mm Stacks and the rest of our DarwinFPV Products!

Features:

• IP67 dust and waterproof rating, capable of withstanding immersion in 0.5 meters of water for 30 minutes without harm.
• All products in the series are crafted using the highest-grade components, providing you with an unparalleled experience and top-tier enjoyment.
• the F722 main control chips boast incredibly strong computing power, allowing for unrestricted full configuration operation.
• Multiple protections including soft-start protection, reverse connection protection, short circuit overcurrent protection, and over-temperature protection ensure double the safety.
• The innovative “sandwich” stacking scheme is employed in the electronic speed controller (ESC), offering greater current capacity, enhanced heat dissipation, and increased spatial utilization.
• 128KHz dynamic PWM output for finer throttle control.
• MPU6000 gyroscope.
• Onboard 4G massive black box storage (16M capacity for F4 flight controller).
• Onboard Pit Switch module (exclusive to F7 flight controller).
• Onboard multi-level LED indicator lights for quick inspection of flight controller operation status. 

Specifications:

FC

• Reserved Interface: 5x UARTs (1, 2, 3, 4, 6), 4x Softserial, 1x I2C, 4x RGB, 1x Buzzer, 1x USER (C09)
• Dimensions: 39.5mm x 39.5mm x 4mm
• Firmware Name: DARWINF722HDV2
• Mounting Hole: 30.5mm x 30.5mm
• Gyroscope: MPU6000
• Black box: Built-in 8G SD card
• BEC Output: 10V/3A, 5V/3A
• Input Voltage: 2-6S LiPo
• Weight: 10.1g ± 0.2g
• MCU: STM32F722
• OSD: AT7456E

ESC

• MCU: 32-bit F4 with a main frequency of 120MHz, supporting a maximum PWM Packet Rate of 128KHz
• Continuous/Peak Current: 100A x 4/120A x 4 (continuous 100A requires a water-cooling environment)
• Supported Throttle Signals: Dshot150/300/600/1200, MultiShot, Oneshot42, Oneshot125
• Weight: 23.0g ± 0.2g (excluding capacitors and power cords)
• Current Sensor: Supported (current meter scale: 125)
• Application: Suitable for 5-10 inch FPV Drones
• Dimensions: 36.8mm x 42.5mm x 7.5mm
• Mounting Hole: 30.5mm x 30.5mm
• Power Cord: 14AWG, 120mm long
• Firmware Name: DARWIN_F4_60
• Input Voltage: 3-8S LiPo
• Power Plug: XT60

Package Includes:

• 4 x M3x25 hexagon socket head black 304 screws (installed on the stack)
• 1 x 14AWG power cable (length 120mm, soldered to the ESC)
• 1 x 35V/1000uF electrolytic capacitor (soldered to the ESC)
• 4 x M3x6.6mm shock-absorbing balls (installed on the ESC)
• 4 x M3x4.5mm shock-absorbing balls (installed on FC)
• 1 x DarwinFPV Cement Waterproof 100A 3-8S ESC
• 1 x DarwinFPV Cement Waterproof F7 FC
• 1 x 65mm analog VTX cable (4P)
• 1 x 65mm receiver cable (4P)
• 1 x 65mm HD VTX cable (6P)
• 1 x 65mm GPS cable (6P)
• 1 x 30mm ESC cable (8P)
• 1 x Hardware Set
• 1 x sticker
• 1 x XT60